|
.The machine is used for MDF,wooden board and
shaving board.It can complete the process of feed workpiece,vertical
sharper feed coiled mateial,cutting end triming ,triming unit,scraping
unit and bulfing ,It can achive the level as same foreign products
and the price is low.It's especially suit able for.
Function:
.End triming,triming and vertical sharper unit adopt imported
high-motor,it's high precision,lower noise,long life.processing
stability.
.Adopt imported frequency converter,action is sensitive and reliable
and with good stability.
Main techical parameters：
| Name |
Parameters |
| Rolling edge-enveloping belt thickness |
0.4-3mm |
| Wood edge sealing tape thickness |
1-12mm |
| Roll-type wood edge sealing tape thickness |
13-55mm |
| Workpiece thickness |
10-50mm |
| Minimum width |
150mm |
| Minimum length |
160mm(wood 400mm) |
| Delivery speed of workpiece |
7.5-11.4m/min |
| Air pressure |
0.7MPa |
| Edge-trimming equipment motor |
0.50kW×2 12000rpm 200Hz |
| Edge-removing equipment motor |
0.70kW×4 12000rpm 200Hz |
| Polishing equipment motor |
0.25kW×2 2800rpm 50Hz |
| Track trimming electrical |
0.70kW×2 12000rpm 200Hz |
| Heater |
1.70kW |
| Workpiece delivery motor |
3.70kW 1400rpm 50Hz |
| Rubber axle motor |
0.20kW 1400rpm 50Hz |
| Squeezing wheel electrical motor |
0.18kW 1400rpm 50Hz |
| Total power capacity |
11.48kW |
| Machine tool dimension |
6000×800×1600mm |
| Net mass |
2600Kg |
|
