.The machine is used for MDF,wooden board and
shaving board.It can complete the process of feed workpiece,feed
coiled material,cutting end triming,triming unit,scraping unit
and bulfing.It can achieve the level as same as foreign products
and the price is low.It’s especially suit able for.
Function:
.End triming and triming unit adopt imported high-motor, it
is high precision, lower noise,long life, processing stability.
.Adopt imported frequency converter,action is sensitive and
reliable and with good stability.
Main techical parameters：
| Name |
Parameters |
| Rolling edge-enveloping belt
thickness |
0.4-3 mm |
| Wood edge sealing tape thickness |
1-10 mm |
| Roll-type wood edge sealing tape
thickness |
13-55mm |
| Workpiece thickness |
10-50 mm |
| Minimum width |
150 mm |
| Minimum length |
160 mm（wood 180mm） |
| Delivery speed of workpiece |
16 m/min |
| Air pressure |
0.7 Mpa |
| Voltage |
380AV |
| Frequency |
50Hz |
| Edge-trimming equipment motor |
0.50kW×2 12000rpm 200Hz |
| Edge-removing equipment motor |
0.70kW×4 12000rpm 200Hz |
| Polishing equipment motor |
0.25kW×2 2800rpm 50Hz |
| Heater |
1.70kW |
| Workpiece delivery motor |
2.20kW 1400rpm 50Hz |
| Rubber axle motor |
0.20kW 1400rpm 50Hz |
| Squeezing wheel electrical motor |
0.18kW 1400rpm 50Hz |
| Total power capacity |
8.58kW |
| Machine tool dimension |
4800×800×1600 mm |
| Net mass |
1800 kg |
|
